STUDY OF THE BRITTLE-ELASTIC MATRIX AND DEFORMATIONS IN THE STRUTS

This is an outdated version published on 2024-02-01. Read the most recent version.

STUDY OF THE BRITTLE-ELASTIC MATRIX AND DEFORMATIONS IN THE STRUTS

Authors

  • Saparov B Assistant Tashkent Institute of Chemical Technology
  • Rakhimov M PhD, senior lecturer
  • Mamatqulova D S301-20 TMJ student
  • Sangirov A senior lecturer Yangier branch of the Tashkent Institute of Chemical Technology

Keywords:

Matrix, rod, inclusions, plastic zone, edge effects, stress, deformation, crack

Abstract

In the considered limit problems, the work done between brittle-elastic matrices and stiffeners, the study of the propagation regions and limits of plastic stresses and deformation-degradation are widely used.

References

. M.T.Matkarimov, M.Ergashev, J.S.Tavbaev. Strength of flexible elements and pipelines of drilling machines. Bishkek. Ilim 2001. 251 p.

.Tavbaev J. About cylindrical channel in thick layer. Fergana. The Research journal. 2004 s. 82.

.Mamasaidov M.T., Ergashov M., Tavbaev J. Toughness flexible element and pipe line drill installation. Bishkek. Ilim. 2001. 251 s.

.Ergashov M., Tavbaev J. Toughness pipe line drill of the installation. Tashkent. Fan. 2002. 119 s.

.Tavbaev J, Usmanov H., Tavbaeva D. Drawn near analytical decision of the marginal problem for packed by sloya. .//__.// Research journal FERPI. 2006. 4 s.5-6.

.Movlonov T., Tavbaev J., Holikulov E. Determination destroying energy cylindrical bodies.// PROBLEMY TEXTILES .2002. 1.s.76-80.

Downloads

Published

2024-02-01

Versions

How to Cite

Saparov B, Rakhimov M, Mamatqulova D, & Sangirov A. (2024). STUDY OF THE BRITTLE-ELASTIC MATRIX AND DEFORMATIONS IN THE STRUTS. IMRAS, 7(2), 126–132. Retrieved from https://journal.imras.org/index.php/sps/article/view/1071

Issue

Vol. 7 No. 2 (2024): IMRAS

Section

Articles